• perfectly transparent sound
• ultra-clean sound 
• signal to noise ration comparable to CD quality recording s(102dB)
• no dynamic loss
• full bandwidth
• silent, click-free switching,  even in high gain level
• MIDI compatibility
• six relay contact closures (S1-S6) for devices utilizing switch to ground functions
• high grade low noise line driver ( BURR BROWN OPA Line Driver )
• alternating or direct current operation

LS-16 is equipped with 10 effect loops, 6 switches ground separated.
LS-16 is controlled by MIDI CC (Control Change) commands over 16 MIDI channels.
LS-16 is compatible with any type of MIDI controller capable of sending CC commands, but to ensure proper operation and maximum effectiveness we recommend using MARK L controllers.

The effects loop can be hooked up with:

• 10 mono effects (10 effects plugged in before the amplifier)
• 10 mono effects  (10 effects plugged in the amplifier’s FX LOOP )

By dividing the loop into two sections we can plug in:

• 10 mono effects (6 before the amplifier and 4 in the amplifier’s FX LOOP)

FRONT PANEL:
The front panel consists of 17 LED diodes informing which loop (L1-L10) or which switch (S1-S6) is on and a MIDI light which informs if the device is receiving MIDI signals.

To connect to the FC-25 use the lockable XLR6. MIDI-IN is equipped with additional power supply thanks to which the FC-25 may be powered by the LS-16 ( pin 1-2 AC power for FC-25,  pin 4-5 MIDI DATA,  pin 3-6 12AC power for FC25 DC converter).To connect audio through a high grade line buffer, connect to the lockable JACK 6,3MM GUITAR IN.

REAR PANEL:
The rear panel consists of  6,3 mm ‘jack’ receptacles used for connecting effects, audio signals and control the amplifier and other devices

• LINK OUT - direct  OUT ( from front panel GUITAR IN ) 
• INPUT 1 - effects loop 1-6 IN ( without high impedance input buffer )
• OUTPUT 1 - ffects loop 1-6 OUT ( high impedance output buffer )
• INPUT 2 - effect loop 7-10 IN
• OUTPUT 2 - effects loop 7-10 OUT
• TUNER OUT - ISO separated TUNER out 
• 10 xSend - used for connecting the effect’s INPUT
• 10 x Return - used for connecting the effect’s OUTPUT  
• 6 x Switch - used for controlling the amplifier channels, tone etc.
• GND/LIFT - chasis ground lift switch
• MIDI IN - used for communications with a midi controller
• MIDI OUT THRU - MIDI thru out for additional device
• MIDI CHANNEL  - switch used for switching channel from 1 to 16
• POWER IN - power supply socket for AC  9V/1A (AC Plug 2,5mmx5,5mm)
• EXT POWER IN - for AC power converter 12VAC /250mA (AC Plug 2,5mmx5,5mm)

Warranty 2 years

PRICE:  699,00 € Include VAT23%
In stock

LS-16 USER MANUAL - click to download